|
|
 |
|
| When I moved the antenna down to the site I found that the boom truss mast had rotated. Fluid Motion doesn't provide any torque values for tightening the nuts and bolts, I must have left them too loose. After rotating the boom mast back to its proper orientation I re-tighened the u-bolts. Unfortunately, the nuts were at the end of the threads. I ended up replacing both u-bolts. I also drilled a hole below the u-bolts through the boom mast and mast to boom plate and inserted a nut and bolt, just to be safe. | |
| Image | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | > | » | |
| Total images: 52 | Help | |